Electrician (PE)
Company
Treetop Talent
Location
Gqeberha
Posted
7 days ago
Via
via Pnet
Apply On
Job Description
Introduction
We are recruiting for an Electrician for our client based in PE
Job Purpose
To perform electrical engineering inspections, repairs and maintenance work on equipment, assets and other infrastructure to minimise and prevent failures / breakdowns on production operations.
Key Performance Areas
1. Repairs (45%)
2. Maintenance (15%)
3. Training (10%)
4. Compliance (10%)
5. Cost Control (10%)
6. Customer Service (10%)
Duties & Responsibilities
KEY PERFORMANCE AREAS
REPAIRS (45%)
• Diagnoses root cause of equipment failure and executes plan / takes action to rectify failure by performing repairs in a speedy manner.
• Ensures minimal equipment downtime and damage by repairing faults / defects / failures as speedily as possible.
• Ensures optimal equipment operation by the application of relevant technical and engineering standard, as well as by obtaining manufacturing process approval of equipment's operating condition.
• Ensures that all maintenance job cards raised are closed out on completion of work performed (Shop Ware)
• Supports and liaises with Production by identifying potential problems in a proactive manner as well as resolving process-related problems and planned maintenance to production runs.
• Provides relevant reports to the Maintenance Supervisor on maintenance repairs performed; Production support performed; downtime recorded and ensures paper trail is up to date.
• Root cause analysis performed.
• Failures / defects identified and rectified in a timely manner.
• Equipment downtime and damage minimized.
• Production support rendered – feedback received.
• Operating conditions of equipment optimal.
• Product quality standards upheld and complied with.
• Reports compiled and available in a timely manner (records kept – document control).
• Job Card Completion 100%
MAINTENANCE (15%)
• Perform “first off" inspection (daily check sheets) on all process changes to determine exact state of equipment.
• Perform routine inspections (predictive and planned) to detect possible equipment failures. Make diagnosis and perform the necessary maintenance work.
• Communicates with Supervisors / Production to arrange maintenance time.
• Coordinates availability of parts in order to perform / execute maintenance routines.
• Compile written report to Maintenance Supervisor on ‘out of the ordinary’ conditions.
• Inspection checklists.
• Number of equipment failures / defects reported.
• Equipment failure or damage reported in a timely manner.
• Reactive, Preventative and Predictive maintenance performed.
• Equipment downtime minimized.
• Reports and feedback provided to Supervisors and Production.
TRAINING (10%)
• Assists with training of Apprentices.
• Prepares training machines for Apprentices to ensure successful corrective equipment training.
• Apprentices capable of performing maintenance / repair duties.
• Equipment prepared for training purposes.
• Feedback received.
COMPLIANCE (10%)
• Operates within controls and procedures in order to ensure the integrity of the Company.
• Reports risks or areas of concern to management within area of responsibility.
• Promotes compliance with all relevant regulations and procedures to prevent fruitless, wasteful and irregular expenditure.
• Compliance with applicable regulations and procedures.
• Risks reported to Manager.
• Cost and expenditure monitored – waste minimized.
COST CONTROL (10%)
• Supports the effective and transparent use of financial and other resources.
• Limits expenditure, reduces costs and ensures deviations from budgetary limits are reported to direct Manager.
• Cost and expenditure monitored – waste minimized.
CUSTOMER SERVICE (10%)
• Maintains effective working relationships with employees and customers to render highest quality of services.
• Identifies and solves problems whilst demonstrating a high level of integrity in line with company core values.
• Client / employee satisfaction index.
• Comebacks / discrepancies minimized.
Desired Experience & Qualification
QUALIFICATIONS
MINIMUM
• Grade 12 Certificate (NQF 4).
• Trade Test: Electrician or Millwright (NQF 5)
EXPERIENCE
MINIMUM
• Up to 3 years’ technical and electrical maintenance experience as an Electrician in a manufacturing environment.
TECHNICAL COMPETENCIES
BEHAVIOURAL COMPETENCIES
• Computer Literacy (Basic MS Office; and SAP, ERP Systems and other job-specific software systems).
• Knowledge of relevant maintenance practices / designs / methodologies / SOP’s.
• Housekeeping and safety principles.
• Proactive.
• Action-oriented.
• Problem Solving and Fault Finding skills.
• Flexibility.
• Planning and Organising.
• Customer Focused.
• Resilient.
• Communication skills (both verbal and written).
We are recruiting for an Electrician for our client based in PE
Job Purpose
To perform electrical engineering inspections, repairs and maintenance work on equipment, assets and other infrastructure to minimise and prevent failures / breakdowns on production operations.
Key Performance Areas
1. Repairs (45%)
2. Maintenance (15%)
3. Training (10%)
4. Compliance (10%)
5. Cost Control (10%)
6. Customer Service (10%)
Duties & Responsibilities
KEY PERFORMANCE AREAS
REPAIRS (45%)
• Diagnoses root cause of equipment failure and executes plan / takes action to rectify failure by performing repairs in a speedy manner.
• Ensures minimal equipment downtime and damage by repairing faults / defects / failures as speedily as possible.
• Ensures optimal equipment operation by the application of relevant technical and engineering standard, as well as by obtaining manufacturing process approval of equipment's operating condition.
• Ensures that all maintenance job cards raised are closed out on completion of work performed (Shop Ware)
• Supports and liaises with Production by identifying potential problems in a proactive manner as well as resolving process-related problems and planned maintenance to production runs.
• Provides relevant reports to the Maintenance Supervisor on maintenance repairs performed; Production support performed; downtime recorded and ensures paper trail is up to date.
• Root cause analysis performed.
• Failures / defects identified and rectified in a timely manner.
• Equipment downtime and damage minimized.
• Production support rendered – feedback received.
• Operating conditions of equipment optimal.
• Product quality standards upheld and complied with.
• Reports compiled and available in a timely manner (records kept – document control).
• Job Card Completion 100%
MAINTENANCE (15%)
• Perform “first off" inspection (daily check sheets) on all process changes to determine exact state of equipment.
• Perform routine inspections (predictive and planned) to detect possible equipment failures. Make diagnosis and perform the necessary maintenance work.
• Communicates with Supervisors / Production to arrange maintenance time.
• Coordinates availability of parts in order to perform / execute maintenance routines.
• Compile written report to Maintenance Supervisor on ‘out of the ordinary’ conditions.
• Inspection checklists.
• Number of equipment failures / defects reported.
• Equipment failure or damage reported in a timely manner.
• Reactive, Preventative and Predictive maintenance performed.
• Equipment downtime minimized.
• Reports and feedback provided to Supervisors and Production.
TRAINING (10%)
• Assists with training of Apprentices.
• Prepares training machines for Apprentices to ensure successful corrective equipment training.
• Apprentices capable of performing maintenance / repair duties.
• Equipment prepared for training purposes.
• Feedback received.
COMPLIANCE (10%)
• Operates within controls and procedures in order to ensure the integrity of the Company.
• Reports risks or areas of concern to management within area of responsibility.
• Promotes compliance with all relevant regulations and procedures to prevent fruitless, wasteful and irregular expenditure.
• Compliance with applicable regulations and procedures.
• Risks reported to Manager.
• Cost and expenditure monitored – waste minimized.
COST CONTROL (10%)
• Supports the effective and transparent use of financial and other resources.
• Limits expenditure, reduces costs and ensures deviations from budgetary limits are reported to direct Manager.
• Cost and expenditure monitored – waste minimized.
CUSTOMER SERVICE (10%)
• Maintains effective working relationships with employees and customers to render highest quality of services.
• Identifies and solves problems whilst demonstrating a high level of integrity in line with company core values.
• Client / employee satisfaction index.
• Comebacks / discrepancies minimized.
Desired Experience & Qualification
QUALIFICATIONS
MINIMUM
• Grade 12 Certificate (NQF 4).
• Trade Test: Electrician or Millwright (NQF 5)
EXPERIENCE
MINIMUM
• Up to 3 years’ technical and electrical maintenance experience as an Electrician in a manufacturing environment.
TECHNICAL COMPETENCIES
BEHAVIOURAL COMPETENCIES
• Computer Literacy (Basic MS Office; and SAP, ERP Systems and other job-specific software systems).
• Knowledge of relevant maintenance practices / designs / methodologies / SOP’s.
• Housekeeping and safety principles.
• Proactive.
• Action-oriented.
• Problem Solving and Fault Finding skills.
• Flexibility.
• Planning and Organising.
• Customer Focused.
• Resilient.
• Communication skills (both verbal and written).
Frequently Asked Questions
Quick answers about Welder Jobs
What is the minimum wage for Welder Jobs in South Africa in 2026?
As per the Department of Employment and Labour, the minimum wage for Welder Jobs in South Africa is R32.50 per hour as of 1 March 2026. Welders must receive 1.5 times this rate for all overtime hours worked beyond 45 hours per week.
What trade certificate and experience do I need to qualify for Welder Jobs in South Africa?
As per the Department of Employment and Labour, applicants for Welder Jobs require a National Certificate in Welding at NQF Level 4 plus a completed trade test from an accredited provider as of 2026. At least 3 years of documented practical experience in arc or MIG welding is mandatory for registration.
Which documents are required to apply for Welder Jobs through government channels in South Africa?
As per the Department of Employment and Labour, applicants must submit a valid South African ID, NQF Level 4 welding certificate, trade test results, and a signed CV when registering on the ESSA system in 2026. Proof of previous employer references covering 24 months is also required.
What are the standard working hours and annual leave for Welder Jobs in South Africa?
As per the Department of Employment and Labour, Welder Jobs operate on a maximum 45-hour work week with 21 consecutive days of paid annual leave after 12 months of service as of 2026. Night shift welders receive an additional 10% allowance on the R32.50 hourly rate.
