Mig & Tig Welder
Company
Motus Aftermarket Parts
Location
Pretoria
Posted
3 days ago
Via
Trabajo.org
Apply On
Job Description
**Main purpose of the job**:
Tig and Mig Welding of canopy kit components and canopy Kits
• *Requirements and Experience**
- At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium
- Red seal certificate in welding or minimum 2 years’ experience as per point 1
- Grade 12
- Ability to read, understand and interpret technical drawings
- Clear criminal record
• *Duties and responsibilities**
- Material identification, Interpret technical drawings, jigging and fabrication.
- Preliminary visual inspection of parts to be welded for visible damages
- Reporting of Non-conformance before commencing with welding
- Correct set up of welding machine, welding gas, gauges and clamps
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of pre-assembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily. (Minimum requirements for a 9 hour work shift are as follows per component: Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.
• *Equity Statement
Tig and Mig Welding of canopy kit components and canopy Kits
• *Requirements and Experience**
- At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium
- Red seal certificate in welding or minimum 2 years’ experience as per point 1
- Grade 12
- Ability to read, understand and interpret technical drawings
- Clear criminal record
• *Duties and responsibilities**
- Material identification, Interpret technical drawings, jigging and fabrication.
- Preliminary visual inspection of parts to be welded for visible damages
- Reporting of Non-conformance before commencing with welding
- Correct set up of welding machine, welding gas, gauges and clamps
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of pre-assembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily. (Minimum requirements for a 9 hour work shift are as follows per component: Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.
• *Equity Statement
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum wage for Plumber Jobs in South Africa as of 2026?
As per the Department of Employment and Labour, the national minimum wage for plumbers in South Africa is R27.45 per hour as of 1 January 2026. Overtime must be paid at 1.5 times the hourly rate after 45 hours per week. Plumbers registered under the Building Bargaining Council receive an additional R450 monthly tool allowance.
What education and experience are required to qualify for Plumber Jobs in South Africa?
As per the Department of Employment and Labour, applicants need an N2 certificate in plumbing plus a minimum of 3 years verifiable experience under a qualified artisan. A Red Seal trade test certificate obtained after 2025 is mandatory for formal employment. No qualifications are accepted without proof of 2800 hours of logged practical training.
What documents are needed to apply for Plumber Jobs through official South African channels?
As per the Department of Employment and Labour, applicants must submit a certified ID copy, Red Seal certificate, and proof of 3 years experience via the ESSA portal by 31 March 2026. A valid tax clearance certificate from SARS and medical fitness report are also required for all applications. Incomplete submissions are rejected within 14 days.
What are the standard working hours and leave entitlements for plumbers in South Africa?
As per the Department of Employment and Labour, plumbers work 45 hours per week with 21 consecutive days of annual leave after 12 months of service as of 2026. Sick leave is capped at 30 days over a 3-year cycle and family responsibility leave is limited to 3 days per year. UIF contributions entitle workers to maternity leave of 4 consecutive months.
