Junior Boilermaker/welder
Company
Career Crew
Location
Pretoria
Posted
5 days ago
Via
Jobs - South Africa | Trabajo.org
Job Description
JUNIOR WELDER BOILERMAKER:
- Fabrication, assemblies
- Oversee welding, read drawings
- Check that jobs are square
- Mild steel experience
A company based in Gauteng is looking for a semiskilled welder boilermaker at its Bronkhorstspruit department to carry out planned and unplanned maintenance and repair work, fabrication of required spare parts and installation, attend to breakdowns, perform standby duties, and attend to callouts timeously to reduce unplanned downtime.
• *The key performance requirements for the position are**:
Participate in health and safety meetings.
Find, report, unsafe, unhealthy and environmentally unfriendly conditions.
Ensure that all relevant procedures are complied with.
Incidents and near misses are reported, investigated and closed out.
Hazardous substances stored, handled, and disposed as per procedure.
Supply suggestions towards improving safety in the working environment.
Permit to work and safe work procedures are followed for all work.
Ensure proper use of personal protective equipment and keep good housekeeping standards always.
• *Delivery and Quality**
Carry out planned maintenance work as per schedules and within stipulated time frames.
Report all anomalies findings of planned and adhoc inspections to the manger and carry out subsequent corrective actions.
Ensure that all breakdown work is carried out within minimum time and in a safe manner and to the highest level of quality.
Participate in shutdown planning by bringing to the attention of the coordinator all equipment related issues that require attention when plant is down.
Participate in the development of safe working procedures and risk assessment.
Ensure spare parts for area of responsibility are maintained to the highest level of cleanliness and quality.
Provide factual and relevant information to assist in solving equipment failure related problems.
Ensure correct welding procedures and consumables are used during maintenance and repair jobs.
• *Continuous Improvement**
Identify possible opportunities to improve workshop reliability and availability.
Execute scheduled maintenance checks.
• *Technical and Functional Competencies**
Knowledge and demonstratable experience in the areas listed below is a key requirement.
Welding consumables
Welding techniques
Welding equipment
Hand tools
Fabrication
Grinding and cutting
Control precision
Trouble shooting
Read drawings.
Basic knowledge of mechanical principles
Ability to plan.
Strong problem-solving skills.
• *Desired Experience Qualification**
Grade 12 Required
N3 in Welding Boilermaking with a Trade Test Required
N4 and higher Advantageous with a Trade Test.
• *Requirements
- Minimum education level: Certificate**
Availability to travel: No
Availability of change of residence: No
• *Must reside in Mooiplaats and surrounding areas.
- Fabrication, assemblies
- Oversee welding, read drawings
- Check that jobs are square
- Mild steel experience
A company based in Gauteng is looking for a semiskilled welder boilermaker at its Bronkhorstspruit department to carry out planned and unplanned maintenance and repair work, fabrication of required spare parts and installation, attend to breakdowns, perform standby duties, and attend to callouts timeously to reduce unplanned downtime.
• *The key performance requirements for the position are**:
Participate in health and safety meetings.
Find, report, unsafe, unhealthy and environmentally unfriendly conditions.
Ensure that all relevant procedures are complied with.
Incidents and near misses are reported, investigated and closed out.
Hazardous substances stored, handled, and disposed as per procedure.
Supply suggestions towards improving safety in the working environment.
Permit to work and safe work procedures are followed for all work.
Ensure proper use of personal protective equipment and keep good housekeeping standards always.
• *Delivery and Quality**
Carry out planned maintenance work as per schedules and within stipulated time frames.
Report all anomalies findings of planned and adhoc inspections to the manger and carry out subsequent corrective actions.
Ensure that all breakdown work is carried out within minimum time and in a safe manner and to the highest level of quality.
Participate in shutdown planning by bringing to the attention of the coordinator all equipment related issues that require attention when plant is down.
Participate in the development of safe working procedures and risk assessment.
Ensure spare parts for area of responsibility are maintained to the highest level of cleanliness and quality.
Provide factual and relevant information to assist in solving equipment failure related problems.
Ensure correct welding procedures and consumables are used during maintenance and repair jobs.
• *Continuous Improvement**
Identify possible opportunities to improve workshop reliability and availability.
Execute scheduled maintenance checks.
• *Technical and Functional Competencies**
Knowledge and demonstratable experience in the areas listed below is a key requirement.
Welding consumables
Welding techniques
Welding equipment
Hand tools
Fabrication
Grinding and cutting
Control precision
Trouble shooting
Read drawings.
Basic knowledge of mechanical principles
Ability to plan.
Strong problem-solving skills.
• *Desired Experience Qualification**
Grade 12 Required
N3 in Welding Boilermaking with a Trade Test Required
N4 and higher Advantageous with a Trade Test.
• *Requirements
- Minimum education level: Certificate**
Availability to travel: No
Availability of change of residence: No
• *Must reside in Mooiplaats and surrounding areas.
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum wage for Plumber Jobs in South Africa as of 2026?
As per the Department of Employment and Labour, the national minimum wage for plumbers in South Africa is R27.45 per hour as of 1 January 2026. Overtime must be paid at 1.5 times the hourly rate after 45 hours per week. Plumbers registered under the Building Bargaining Council receive an additional R450 monthly tool allowance.
What education and experience are required to qualify for Plumber Jobs in South Africa?
As per the Department of Employment and Labour, applicants need an N2 certificate in plumbing plus a minimum of 3 years verifiable experience under a qualified artisan. A Red Seal trade test certificate obtained after 2025 is mandatory for formal employment. No qualifications are accepted without proof of 2800 hours of logged practical training.
What documents are needed to apply for Plumber Jobs through official South African channels?
As per the Department of Employment and Labour, applicants must submit a certified ID copy, Red Seal certificate, and proof of 3 years experience via the ESSA portal by 31 March 2026. A valid tax clearance certificate from SARS and medical fitness report are also required for all applications. Incomplete submissions are rejected within 14 days.
What are the standard working hours and leave entitlements for plumbers in South Africa?
As per the Department of Employment and Labour, plumbers work 45 hours per week with 21 consecutive days of annual leave after 12 months of service as of 2026. Sick leave is capped at 30 days over a 3-year cycle and family responsibility leave is limited to 3 days per year. UIF contributions entitle workers to maternity leave of 4 consecutive months.
