Mig & Tig Welder
Company
Motus Aftermarket Parts
Location
Pretoria
Posted
3 days ago
Via
Trabajo.org
Apply On
Job Description
**Main purpose of the job**:
Tig and Mig Welding of canopy kit components and canopy Kits
• *Requirements and Experience**
- At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium
- Red seal certificate in welding or minimum 2 years’ experience as per point 1
- Grade 12
- Ability to read, understand and interpret technical drawings
- Clear criminal record
• *Duties and responsibilities**
- Material identification, Interpret technical drawings, jigging and fabrication.
- Preliminary visual inspection of parts to be welded for visible damages
- Reporting of Non-conformance before commencing with welding
- Correct set up of welding machine, welding gas, gauges and clamps
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of pre-assembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily. (Minimum requirements for a 9 hour work shift are as follows per component: Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.
• *Equity Statement
Tig and Mig Welding of canopy kit components and canopy Kits
• *Requirements and Experience**
- At least 2 - years’ experience in Mig and Tig welding on both stainless steel and aluminium
- Red seal certificate in welding or minimum 2 years’ experience as per point 1
- Grade 12
- Ability to read, understand and interpret technical drawings
- Clear criminal record
• *Duties and responsibilities**
- Material identification, Interpret technical drawings, jigging and fabrication.
- Preliminary visual inspection of parts to be welded for visible damages
- Reporting of Non-conformance before commencing with welding
- Correct set up of welding machine, welding gas, gauges and clamps
- Welding of canopy kit components according to drawing dimensions and welding sequence.
- Welding of pre-assembled canopy kits according to drawing and critical dimensions.
- Reaching / exceeding minimum welding requirements in terms of quantity & quality daily. (Minimum requirements for a 9 hour work shift are as follows per component: Ribs x 7 sets; Doors x 14 sets; D/C canopies x 4.5 complete units; S/C canopies X 2.75)
- Post welding inspection: Measuring & Recording of critical dimensions after welding for conformance to drawing and signing of on quality on production paperwork.
- Every employee in the production line is responsible for quality and thus all and any deviations need to be reported.
All production documentation to be completed daily in real time.
- Always maintain welding machine, all tools, gauges and measuring equipment in good working condition.
- Perform tasks as requested from time to time by management or direct superior
- Comply with all health & Safety regulations and other company policy & procedures.
- General House Keeping in your workstation / welding bay and immediate surrounding area.
• *Equity Statement
Frequently Asked Questions
Quick answers about Driver Jobs
What is the 2026 national minimum wage for code 10 and 14 drivers in South Africa?
As per the Department of Employment and Labour, the national minimum wage for drivers in South Africa is R27.58 per hour from 1 March 2026. Overtime after 45 hours per week must be paid at 1.5 times the hourly rate, equating to R41.37 per hour.
What Professional Driving Permit (PrDP) requirements apply to taxi and truck drivers in South Africa in 2026?
As per the Department of Employment and Labour, all drivers of vehicles over 3 500 kg or carrying passengers for reward must hold a valid PrDP issued by the Department of Transport. The permit costs R260 and must be renewed every five years with a medical fitness certificate dated no older than 24 months.
How many hours per week can drivers legally work in South Africa and what leave is mandatory in 2026?
As per the Department of Employment and Labour, drivers may not exceed 45 ordinary hours per week under the Basic Conditions of Employment Act. Employees receive 21 consecutive days of annual leave after 12 months of service and 6 weeks of sick leave over a 36-month cycle.
Which documents are required to apply for a driver position through the Department of Employment and Labour in 2026?
As per the Department of Employment and Labour, applicants must submit a valid South African ID, code-specific driving licence, PrDP, and recent tax clearance certificate when registering on the ESSA system. All documents must be uploaded as certified copies not older than three months.
