General Welder
Company
Objectivepersonnel
Location
Pretoria
Posted
2 days ago
Via
via BeBee
Job Description
General Welder
Qualification
• Grade 12
• Must be able to read, write and communicate effectively in English.
• Trade Test in Welding (advantageous but not essential)
Requirements
• Minimum 3 years' proven experience as a welder in a manufacturing or engineering environment.
• Valid drivers license
• Experience working from engineering drawings.
• Experience with fabrication and assembly of metal components.
• Must be proficient in “Stick” (SMAW) and “TIG” (GTAW) processes.
• Must be proficient to weld at least in a 3G position (6G bonus)
• Must be proficient in the following welding material:
• Stainless steel (304L / 316L)
• Carbon Steel / Mild steel (516GR70 / 430A / etc.)
• Aluminium (1050 / 1050H14
• Attention to detail and be safety conscious
• Quality conscious
• Good hand-eye coordination, with the ability to work independently and under pressure
• Problem-solving ability, with good communication skills, also ensuring that production issues are communicated promptly
• Efficient Time management
• Be reliable and dependable
• Team player - Work effectively with supervisors and colleagues
• Safely manufacture, fabricate, repair and assemble metal components by performing high-quality welding using approved welding procedures and company quality standards.
• Responsible for ensuring that fabricated products meet dimensional, quality and safety requirements while maintaining productivity targets
• Stand for extended periods.
• Lift materials within safe manual handling limits.
• Work in confined spaces where required.
• Work in hot environments.
• Perform repetitive manual tasks.
• Use power tools safely.
• Wear PPE for extended periods.
Duties
• Production schedules
• Work instructions
• Engineering drawings
• Welding Procedure Specifications (WPS)
• Material issue documentation
• Raw materials
• Welding consumables
• Welding equipment
• Measuring instruments
• Quality standards
• Safety procedures
• Job cards
• Repair requests
• Maintain good housekeeping standards in accordance with company policies.
• Complete work within agreed production timelines.
• Minimise material waste.
• Reduce rework through quality workmanship.
• Assist with continuous improvement initiatives.
• Meet daily production targets where applicable
• Quality welded components
• Fabricated assemblies meeting drawing specifications
• Completed production orders
• Accurate dimensional compliance
• Defect-free welds
• Properly completed job documentation
• Safe and clean work area
• Minimal material wastage
• Equipment maintained in working condition
• Compliance with quality and safety standards
• Equipment Maintenance
• Inspect welding equipment before use.
• Perform basic daily maintenance.
• Keep welding machines clean.
• Replace worn consumables.
• Report equipment faults promptly.
• Ensure tools are stored correctly
• Safety
• Wear prescribed PPE at all times.
• Follow company safety procedures.
• Maintain a clean and organised workstation.
• Document No.SP6.2 SF16 Revision No.: 0 Page 5 of 5
• Handle gas cylinders safely
• Ensure fire prevention measures are followed.
• Participate in safety meetings
• Fabrication
• Assemble fabricated components.
• Prepare materials before welding.
• Cut, grind and fit materials.
• Verify dimensions before welding.
• Maintain dimensional accuracy throughout fabrication.
• Assist with fitting and assembly when required
• Quality Control
• Inspect completed welds.
• Verify work against drawings and specifications.
• Identify welding defects.
• Correct non-conforming work.
• Ensure all work complies with company quality
Qualification
• Grade 12
• Must be able to read, write and communicate effectively in English.
• Trade Test in Welding (advantageous but not essential)
Requirements
• Minimum 3 years' proven experience as a welder in a manufacturing or engineering environment.
• Valid drivers license
• Experience working from engineering drawings.
• Experience with fabrication and assembly of metal components.
• Must be proficient in “Stick” (SMAW) and “TIG” (GTAW) processes.
• Must be proficient to weld at least in a 3G position (6G bonus)
• Must be proficient in the following welding material:
• Stainless steel (304L / 316L)
• Carbon Steel / Mild steel (516GR70 / 430A / etc.)
• Aluminium (1050 / 1050H14
• Attention to detail and be safety conscious
• Quality conscious
• Good hand-eye coordination, with the ability to work independently and under pressure
• Problem-solving ability, with good communication skills, also ensuring that production issues are communicated promptly
• Efficient Time management
• Be reliable and dependable
• Team player - Work effectively with supervisors and colleagues
• Safely manufacture, fabricate, repair and assemble metal components by performing high-quality welding using approved welding procedures and company quality standards.
• Responsible for ensuring that fabricated products meet dimensional, quality and safety requirements while maintaining productivity targets
• Stand for extended periods.
• Lift materials within safe manual handling limits.
• Work in confined spaces where required.
• Work in hot environments.
• Perform repetitive manual tasks.
• Use power tools safely.
• Wear PPE for extended periods.
Duties
• Production schedules
• Work instructions
• Engineering drawings
• Welding Procedure Specifications (WPS)
• Material issue documentation
• Raw materials
• Welding consumables
• Welding equipment
• Measuring instruments
• Quality standards
• Safety procedures
• Job cards
• Repair requests
• Maintain good housekeeping standards in accordance with company policies.
• Complete work within agreed production timelines.
• Minimise material waste.
• Reduce rework through quality workmanship.
• Assist with continuous improvement initiatives.
• Meet daily production targets where applicable
• Quality welded components
• Fabricated assemblies meeting drawing specifications
• Completed production orders
• Accurate dimensional compliance
• Defect-free welds
• Properly completed job documentation
• Safe and clean work area
• Minimal material wastage
• Equipment maintained in working condition
• Compliance with quality and safety standards
• Equipment Maintenance
• Inspect welding equipment before use.
• Perform basic daily maintenance.
• Keep welding machines clean.
• Replace worn consumables.
• Report equipment faults promptly.
• Ensure tools are stored correctly
• Safety
• Wear prescribed PPE at all times.
• Follow company safety procedures.
• Maintain a clean and organised workstation.
• Document No.SP6.2 SF16 Revision No.: 0 Page 5 of 5
• Handle gas cylinders safely
• Ensure fire prevention measures are followed.
• Participate in safety meetings
• Fabrication
• Assemble fabricated components.
• Prepare materials before welding.
• Cut, grind and fit materials.
• Verify dimensions before welding.
• Maintain dimensional accuracy throughout fabrication.
• Assist with fitting and assembly when required
• Quality Control
• Inspect completed welds.
• Verify work against drawings and specifications.
• Identify welding defects.
• Correct non-conforming work.
• Ensure all work complies with company quality
Frequently Asked Questions
Quick answers about Cleaning Staff Jobs
What is the 2026 national minimum wage for cleaning staff jobs in South Africa?
The Department of Employment and Labour sets the national minimum wage at R30.50 per hour for all workers including cleaning staff from 1 March 2026. Overtime must be paid at 1.5 times the hourly rate after 45 hours per week. Employers in the contract cleaning sector must display this rate on payslips.
What are the maximum weekly working hours and annual leave entitlements for cleaning staff in South Africa in 2026?
Cleaning staff may not work more than 45 hours per week or 9 hours per day under the Basic Conditions of Employment Act. Workers receive 21 consecutive days of paid annual leave after 12 months of employment. Sick leave is 36 days over a 3-year cycle.
Do cleaning staff jobs in South Africa require any education or experience qualifications in 2026?
No formal education or prior experience is required by the Department of Employment and Labour for entry-level cleaning positions. Employers may request a Grade 9 certificate or basic literacy for safety compliance. A valid South African ID or work permit is mandatory for all applicants.
What documents are needed to apply for cleaning staff jobs through the Department of Employment and Labour in 2026?
Applicants must submit a valid South African ID, proof of address, bank account details, and a completed Z83 form when applying via labour centres. A CV and contactable references are also required for shortlisting. Foreign nationals need a valid work visa endorsed for domestic or cleaning work.
