Welding | Welder
Company
Feldmeier Equipment Inc.
Location
New York, NY
Job Type
Full-time
Posted
5 days ago
Via
via Jooble
Apply On
Job Description
Description
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of 2026?
As per the U.S. Department of Labor, the median hourly wage for welders, cutters, solderers, and brazers is $25.22 as of May 2026 data. Welders in manufacturing earn $26.15 per hour on average while those in construction receive $24.80 per hour. Overtime pay at 1.5 times the regular rate applies after 40 hours per week under the Fair Labor Standards Act.
What certifications and experience are required to qualify for welder jobs in the United States?
As per the U.S. Department of Labor, welders must complete a high school diploma or equivalent plus a postsecondary welding program lasting 6 to 18 months. AWS Certified Welder credential and 2,000 hours of documented experience are required for most positions in structural welding. Employers in shipbuilding and aerospace require additional ASME Section IX qualifications.
What are the standard working hours and paid leave entitlements for welders in the United States?
As per the U.S. Department of Labor, full-time welders work 40 hours per week with overtime required after 40 hours. Workers receive at least 10 paid holidays and accrue 10 days of paid sick leave annually under the Families First Coronavirus Response Act extensions. Union contracts in construction add 15 days of paid vacation after one year.
How are federal income taxes calculated on welder wages in the United States for 2026?
As per the Internal Revenue Service, welders earning $52,500 annually in 2026 pay 12% federal income tax on income between $11,601 and $47,150 plus 22% on the amount above $47,150. Social Security tax is withheld at 6.2% up to the $168,600 wage base. Employers must issue Form W-2 by January 31 each year.
