Aluminum Welder MIG / TIG Direct hire or Per Diem available
Company
NSC Technologies, LLC
Location
Los Angeles, CA
Via
6AM City Job Board
Apply On
Job Description
Job Description
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of 2026?
As per the U.S. Department of Labor, the median hourly wage for welders, cutters, solderers, and brazers is $25.22 as of May 2026 data. Welders in manufacturing earn $26.15 per hour on average while those in construction receive $24.80 per hour. Overtime pay at 1.5 times the regular rate applies after 40 hours per week under the Fair Labor Standards Act.
What certifications and experience are required to qualify for welder jobs in the United States?
As per the U.S. Department of Labor, welders must complete a high school diploma or equivalent plus a postsecondary welding program lasting 6 to 18 months. AWS Certified Welder credential and 2,000 hours of documented experience are required for most positions in structural welding. Employers in shipbuilding and aerospace require additional ASME Section IX qualifications.
What are the standard working hours and paid leave entitlements for welders in the United States?
As per the U.S. Department of Labor, full-time welders work 40 hours per week with overtime required after 40 hours. Workers receive at least 10 paid holidays and accrue 10 days of paid sick leave annually under the Families First Coronavirus Response Act extensions. Union contracts in construction add 15 days of paid vacation after one year.
How are federal income taxes calculated on welder wages in the United States for 2026?
As per the Internal Revenue Service, welders earning $52,500 annually in 2026 pay 12% federal income tax on income between $11,601 and $47,150 plus 22% on the amount above $47,150. Social Security tax is withheld at 6.2% up to the $168,600 wage base. Employers must issue Form W-2 by January 31 each year.
