Welder II
Company
Plug Power
Location
New York, NY
Job Type
Full-time
Via
Talent.com
Apply On
Job Description
Welder II
Status: Non-exempt (hourly)
Position Summary
The welder is responsible for the construction of various products primarily focusing on welding and fabrication techniques. The welder will follow the process below in every welding scenario (I, P, W, C, I)
• Identify materials to be welded and appropriate welding/ fabrication method.
• Prepare and fit materials for welding/ fabrication using grinders, clamps, tape measures, etc.
• Weld materials within the WPS parameters per the engineering weld callout.
• Clean welded materials.
• Inspect welds to ensure quality standards and engineering weld callouts have been met.
Core Duties and Responsibilities
• Operate appropriate equipment to put together mechanical structures or parts with a great deal of precision
• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, tape measures, etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead)
• Able to determine that weld meets ASME specifications
Education and Experience
• The ideal candidate will have a steady hand and great attention to detail
• Knowledge of different kinds of metal and their properties is essential
• Proven experience as welder
• Experience using a variety of welding equipment and procedures (GTAW, GMAW, FCAW)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Minimum one year welding and fabrication experience
• Must be able to pass on-site welding test*
Welder I – 0-5 years’ experience
Welder II – 5-8 years’ experience
Senior Welder– 8+ years’ experience
Master Welder – 10+ years’ experience & Cryogenic experience
Pay Rate:
$23.00 - $33.00
We offer a fantastic total rewards package at Plug, and a brief summary is below:
✓Base salary is determined on a number of factors including but not limited to education, experience, skills, and geography. These factors are considered when making an offer of employment. If you are interested in this position, we’d ask that you apply.
âś“The above pay range, may not take into account local geographic pay variations. If there is an applicable geographic differential, a member of the HR team can discuss that with you.
âś“Health, Dental & Vision Insurance eligibility starting from the first day of hire
âś“401(k) with 5% company match
âś“Bonus eligibility
âś“Paid time off including vacation, personal and sick time
âś“Paid Holidays
âś“Wellness Reimbursement Program
âś“Potential to apply for Tuition Reimbursement
âś“Employee Referral program
âś“Employee Assistance Program
Plug Power Inc. is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
Status: Non-exempt (hourly)
Position Summary
The welder is responsible for the construction of various products primarily focusing on welding and fabrication techniques. The welder will follow the process below in every welding scenario (I, P, W, C, I)
• Identify materials to be welded and appropriate welding/ fabrication method.
• Prepare and fit materials for welding/ fabrication using grinders, clamps, tape measures, etc.
• Weld materials within the WPS parameters per the engineering weld callout.
• Clean welded materials.
• Inspect welds to ensure quality standards and engineering weld callouts have been met.
Core Duties and Responsibilities
• Operate appropriate equipment to put together mechanical structures or parts with a great deal of precision
• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, tape measures, etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead)
• Able to determine that weld meets ASME specifications
Education and Experience
• The ideal candidate will have a steady hand and great attention to detail
• Knowledge of different kinds of metal and their properties is essential
• Proven experience as welder
• Experience using a variety of welding equipment and procedures (GTAW, GMAW, FCAW)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Minimum one year welding and fabrication experience
• Must be able to pass on-site welding test*
Welder I – 0-5 years’ experience
Welder II – 5-8 years’ experience
Senior Welder– 8+ years’ experience
Master Welder – 10+ years’ experience & Cryogenic experience
Pay Rate:
$23.00 - $33.00
We offer a fantastic total rewards package at Plug, and a brief summary is below:
✓Base salary is determined on a number of factors including but not limited to education, experience, skills, and geography. These factors are considered when making an offer of employment. If you are interested in this position, we’d ask that you apply.
âś“The above pay range, may not take into account local geographic pay variations. If there is an applicable geographic differential, a member of the HR team can discuss that with you.
âś“Health, Dental & Vision Insurance eligibility starting from the first day of hire
âś“401(k) with 5% company match
âś“Bonus eligibility
âś“Paid time off including vacation, personal and sick time
âś“Paid Holidays
âś“Wellness Reimbursement Program
âś“Potential to apply for Tuition Reimbursement
âś“Employee Referral program
âś“Employee Assistance Program
Plug Power Inc. is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of 2026?
As per the U.S. Department of Labor, the median hourly wage for welders, cutters, solderers, and brazers is $25.22 as of May 2026 data. Welders in manufacturing earn $26.15 per hour on average while those in construction receive $24.80 per hour. Overtime pay at 1.5 times the regular rate applies after 40 hours per week under the Fair Labor Standards Act.
What certifications and experience are required to qualify for welder jobs in the United States?
As per the U.S. Department of Labor, welders must complete a high school diploma or equivalent plus a postsecondary welding program lasting 6 to 18 months. AWS Certified Welder credential and 2,000 hours of documented experience are required for most positions in structural welding. Employers in shipbuilding and aerospace require additional ASME Section IX qualifications.
What are the standard working hours and paid leave entitlements for welders in the United States?
As per the U.S. Department of Labor, full-time welders work 40 hours per week with overtime required after 40 hours. Workers receive at least 10 paid holidays and accrue 10 days of paid sick leave annually under the Families First Coronavirus Response Act extensions. Union contracts in construction add 15 days of paid vacation after one year.
How are federal income taxes calculated on welder wages in the United States for 2026?
As per the Internal Revenue Service, welders earning $52,500 annually in 2026 pay 12% federal income tax on income between $11,601 and $47,150 plus 22% on the amount above $47,150. Social Security tax is withheld at 6.2% up to the $168,600 wage base. Employers must issue Form W-2 by January 31 each year.
