Tank Welder (Req #: 6425)
Company
PALA Interstate, LLC
Location
Houston, TX
Job Type
Full-time
Posted
4 days ago
Via
via Jobs In Welding
Apply On
Job Description
Date Posted: 04/28/2026
Location: Houston, TX
Job Category: Basic Application (PALA)
Salary Interval: Full Time
Pay Range: N/A
The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.
PALA Interstate, LLC
Summary
Lays out, fits and welds together metal components of such products as pipelines, boilers, tanks, structural steel and vehicles.
Reads, studies and interprets job specifications, plans and blue prints. Uses basic math skills including geometry, trigonometry to make calculations for work. Can complete difficult job tasks according to job specifications with minimal or no supervision.
Essential Functions
• Ability to understand and follow all safety rules and to set an example in Safety, Quality, and Production. Measurable criteria will be used in these areas to determine classification.
• Ability to weld to Section 9 of ASME Code in all positions.
• Operations of air arc-gouging and burning torch that requires limited grinding to complete welding process.
• Operation of all air and electric power tools used in a normal tank repair.
• Ability to recognize the proper fit up of weld joints and ability to understand and follow the outlined method of welding.
• Exemplify proper techniques of rigging.
• Understand the proper use of key plates and fit up equipment to control banding and peaking in horizontal and vertical seams.
• Ability to weld approximately 180 linear feet of acceptable seal pass weld using 5P 3/16" electrodes.
• Ability to weld approximately 250 linear feet of acceptable jet weld on 3/16" and 1/4" CS lap weld using 7024-1 electrodes.
• Ability to weld approximately 130 linear feet of completed 3/8" comer weld using 7/32" 7018 electrodes.
• Ability to weld linear feet of vertical and horizontal weld for the following thickness using 7018 electrodes (completed weld):
• Ability to complete items 8 - 10 with no more than 30 minutes of pickup work per day.*Buttering has not been included.
• *Buttering has not been included.
• Ability to complete item 11 with an acceptable RT rate of 95% or higher.
• Ability to work at elevations above ground level using vertical ladders positioned on tank scaffold and ability to work in shell buggies.
• Ability to perform work under breathing air conditions using required respirator.
• Willingness to perform other tank duties on an as needed basis.
• Ability to work in confined space.
• Operation of a Man-Lift.
Required Education and Experience:
• Minimum three years' experience in welding with SMAW, GTAW, and Flux Core process.
• Must pass required welding test as required by the specific job site.
Preferred Education and Experience
• High School or GED preferred but not required.
• Trade School program preferred but not required.
PALA Group, Inc. and its Subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
PI284194095
Location: Houston, TX
Job Category: Basic Application (PALA)
Salary Interval: Full Time
Pay Range: N/A
The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.
PALA Interstate, LLC
Summary
Lays out, fits and welds together metal components of such products as pipelines, boilers, tanks, structural steel and vehicles.
Reads, studies and interprets job specifications, plans and blue prints. Uses basic math skills including geometry, trigonometry to make calculations for work. Can complete difficult job tasks according to job specifications with minimal or no supervision.
Essential Functions
• Ability to understand and follow all safety rules and to set an example in Safety, Quality, and Production. Measurable criteria will be used in these areas to determine classification.
• Ability to weld to Section 9 of ASME Code in all positions.
• Operations of air arc-gouging and burning torch that requires limited grinding to complete welding process.
• Operation of all air and electric power tools used in a normal tank repair.
• Ability to recognize the proper fit up of weld joints and ability to understand and follow the outlined method of welding.
• Exemplify proper techniques of rigging.
• Understand the proper use of key plates and fit up equipment to control banding and peaking in horizontal and vertical seams.
• Ability to weld approximately 180 linear feet of acceptable seal pass weld using 5P 3/16" electrodes.
• Ability to weld approximately 250 linear feet of acceptable jet weld on 3/16" and 1/4" CS lap weld using 7024-1 electrodes.
• Ability to weld approximately 130 linear feet of completed 3/8" comer weld using 7/32" 7018 electrodes.
• Ability to weld linear feet of vertical and horizontal weld for the following thickness using 7018 electrodes (completed weld):
• Ability to complete items 8 - 10 with no more than 30 minutes of pickup work per day.*Buttering has not been included.
• *Buttering has not been included.
• Ability to complete item 11 with an acceptable RT rate of 95% or higher.
• Ability to work at elevations above ground level using vertical ladders positioned on tank scaffold and ability to work in shell buggies.
• Ability to perform work under breathing air conditions using required respirator.
• Willingness to perform other tank duties on an as needed basis.
• Ability to work in confined space.
• Operation of a Man-Lift.
Required Education and Experience:
• Minimum three years' experience in welding with SMAW, GTAW, and Flux Core process.
• Must pass required welding test as required by the specific job site.
Preferred Education and Experience
• High School or GED preferred but not required.
• Trade School program preferred but not required.
PALA Group, Inc. and its Subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
PI284194095
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of 2026?
As per the U.S. Department of Labor, the median hourly wage for welders, cutters, solderers, and brazers is $25.22 as of May 2026 data. Welders in manufacturing earn $26.15 per hour on average while those in construction receive $24.80 per hour. Overtime pay at 1.5 times the regular rate applies after 40 hours per week under the Fair Labor Standards Act.
What certifications and experience are required to qualify for welder jobs in the United States?
As per the U.S. Department of Labor, welders must complete a high school diploma or equivalent plus a postsecondary welding program lasting 6 to 18 months. AWS Certified Welder credential and 2,000 hours of documented experience are required for most positions in structural welding. Employers in shipbuilding and aerospace require additional ASME Section IX qualifications.
What are the standard working hours and paid leave entitlements for welders in the United States?
As per the U.S. Department of Labor, full-time welders work 40 hours per week with overtime required after 40 hours. Workers receive at least 10 paid holidays and accrue 10 days of paid sick leave annually under the Families First Coronavirus Response Act extensions. Union contracts in construction add 15 days of paid vacation after one year.
How are federal income taxes calculated on welder wages in the United States for 2026?
As per the Internal Revenue Service, welders earning $52,500 annually in 2026 pay 12% federal income tax on income between $11,601 and $47,150 plus 22% on the amount above $47,150. Social Security tax is withheld at 6.2% up to the $168,600 wage base. Employers must issue Form W-2 by January 31 each year.
