Welding | Welder
Company
Feldmeier Equipment Inc.
Location
New York, NY
Job Type
Full-time
Posted
5 days ago
Via
via Jooble
Apply On
Job Description
Description
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Job Summary:
Welders are the primary constructors of vessels at Feldmeier Equipment. The Welder position is quite varied regarding the scope of work performed. Workers who are designated as Welder may also be tasked with other general work tasks not specifically covered under the Welder job description. Tasks may include the following but are not limited to; as job duties may change throughout day depending on the workload.
Requirements
Essential Functions of Position:
Comply with all Feldmeier safety and Company policies and Occupational Health and Safety Regulations.
Ability to TIG weld, spot weld and MIG weld stainless steel.
Interpret blueprints, drawings, and measurements to plan layouts.
Layout component locations per instructions.
Prepare work surface via cutting and finishing.
Weld small and large components in flat, vertical, and overhead positions via appropriate welding technique.
Set up and operate equipment for assigned jobs.
Complete housekeeping duties in assigned area or as requested by management.
Complete all required paperwork and properly log time into the MES system, logging on and off.
Minimum Qualifications:
Boces welding certificate or 6 months of welding experience
Previous fabricating experience
Ability to read measuring tapes and operate tools- grinder, and welding torch.
Preferred Qualifications:
2 or more years of TIG experience
Experience welding with different Alloys
Proficiently weld in flat, vertical and overhead positions
Physical Requirements:
Ability to stand and/or walk for up to 8 hours per day.
Occasional lifting, carrying, and maneuvering up to 50 pounds.
Ability to climb ladders, stairs, and platforms for elevated work.
Walking, bending, squatting, kneeling, balancing, stooping, lie down inside or under vessel and twisting while performing required job tasks.
Comfortable in chemically Hazardous Situations.
Being mindful of chemical safety and use proper PPE when required.
Being able to hold a 4-8lb grinder for prolonged periods, while applying force.
Ability to grasp welding torch while welding parts for brief periods to long periods of time.
Job Title: Welder/ Fabricator Reports To: Floor Supervisor
Classification: Non-exempt Pay Range: 19.00-31.50hr
#J-18808-Ljbffr Feldmeier Equipment Inc.
Frequently Asked Questions
Quick answers about Restaurant Jobs
What is the federal minimum cash wage for tipped restaurant servers in the United States in 2026?
As per the U.S. Department of Labor, the minimum cash wage for tipped restaurant employees is $2.13 per hour as of January 2026, provided tips bring total earnings to at least $7.25 per hour. Employers must supplement any shortfall to reach the full minimum wage. Overtime at 1.5 times the regular rate applies after 40 hours per week.
What are the minimum age and experience requirements for entry-level restaurant jobs like dishwashers in the United States?
According to the U.S. Department of Labor, workers must be at least 16 years old for most restaurant positions under the Fair Labor Standards Act as of 2026, with 14-15 year olds limited to non-hazardous roles during limited hours. No prior experience or education is required for entry-level roles such as dishwashers or bussers.
Which documents are required when applying for restaurant jobs in the United States?
As per U.S. Citizenship and Immigration Services, applicants must complete Form I-9 with documents proving identity and employment authorization such as a U.S. passport or driver's license plus Social Security card by the first day of work in 2026. Employers verify these within three business days.
How many hours per week can restaurant workers be scheduled and what leave applies in 2026?
The U.S. Department of Labor states that non-exempt restaurant employees receive overtime pay after 40 hours in a workweek at 1.5 times their rate as of 2026, with no federal cap on total weekly hours. There is no federal requirement for paid sick leave or vacation in restaurant jobs.
