Structural Welder **$180/day per diem**
Company
Craft and Technical Solutions, LLC
Location
Houston, TX
Job Type
Full-time
Posted
1 day ago
Via
via Indeed
Apply On
Job Description
Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. Currently, CTS is reviewing resumes for Structural Welders in Mobile, AL.
• *$180/day per diem for qualified applicants**
• *60 hours per week**
Responsibilities:
• Complete fillet and butt welds GMAW-P process (multi-pass) in 2G, 3G, and 4G positions.
• Heat oxygen/propane heating torch.
• Perform grinding and pick up work as needed.
• Complete air carbon arc gouging.
• Properly use fillet and butt gauges.
• Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material.
• Follow OSHA safety regulations.
• Maintain welding equipment and keep the work area clean and organized.
Requirements:
• Minimum 10 years of naval/commercial pulse welding experience.
• Successfully pass several tests over a three-week period.
• Must be able to speak, read, and understand English.
• Must have reliable transportation.
• Familiar with OSHA regulations relative to the shipbuilding industry.
• Pass a drug screen and background check.
• Comfortable with heights and in confined spaces.
• Lift 50lbs without assistance.
• Must understand the layout of the ship and compartment identification.
• Basic reading, writing and math skills required.
• Must be a US citizen.
CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in:
• Health
• Dental
• Vision
• Voluntary Life/Voluntary AD&D
• Short-Term Disability
• Long-Term Disability
• Hospital Indemnity
• Accident
• Critical Illness
• 401k
Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!
Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can consider you as an applicant for this position.
CTS is an EOE AA M/F/Vet/Disability
IND6
Job Type: Full-time
Pay: $50.00 per hour
Work Location: In person
• *$180/day per diem for qualified applicants**
• *60 hours per week**
Responsibilities:
• Complete fillet and butt welds GMAW-P process (multi-pass) in 2G, 3G, and 4G positions.
• Heat oxygen/propane heating torch.
• Perform grinding and pick up work as needed.
• Complete air carbon arc gouging.
• Properly use fillet and butt gauges.
• Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material.
• Follow OSHA safety regulations.
• Maintain welding equipment and keep the work area clean and organized.
Requirements:
• Minimum 10 years of naval/commercial pulse welding experience.
• Successfully pass several tests over a three-week period.
• Must be able to speak, read, and understand English.
• Must have reliable transportation.
• Familiar with OSHA regulations relative to the shipbuilding industry.
• Pass a drug screen and background check.
• Comfortable with heights and in confined spaces.
• Lift 50lbs without assistance.
• Must understand the layout of the ship and compartment identification.
• Basic reading, writing and math skills required.
• Must be a US citizen.
CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in:
• Health
• Dental
• Vision
• Voluntary Life/Voluntary AD&D
• Short-Term Disability
• Long-Term Disability
• Hospital Indemnity
• Accident
• Critical Illness
• 401k
Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!
Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can consider you as an applicant for this position.
CTS is an EOE AA M/F/Vet/Disability
IND6
Job Type: Full-time
Pay: $50.00 per hour
Work Location: In person
Frequently Asked Questions
Quick answers about Restaurant Jobs
What is the federal minimum cash wage for tipped restaurant servers in the United States in 2026?
As per the U.S. Department of Labor, the minimum cash wage for tipped restaurant employees is $2.13 per hour as of January 2026, provided tips bring total earnings to at least $7.25 per hour. Employers must supplement any shortfall to reach the full minimum wage. Overtime at 1.5 times the regular rate applies after 40 hours per week.
What are the minimum age and experience requirements for entry-level restaurant jobs like dishwashers in the United States?
According to the U.S. Department of Labor, workers must be at least 16 years old for most restaurant positions under the Fair Labor Standards Act as of 2026, with 14-15 year olds limited to non-hazardous roles during limited hours. No prior experience or education is required for entry-level roles such as dishwashers or bussers.
Which documents are required when applying for restaurant jobs in the United States?
As per U.S. Citizenship and Immigration Services, applicants must complete Form I-9 with documents proving identity and employment authorization such as a U.S. passport or driver's license plus Social Security card by the first day of work in 2026. Employers verify these within three business days.
How many hours per week can restaurant workers be scheduled and what leave applies in 2026?
The U.S. Department of Labor states that non-exempt restaurant employees receive overtime pay after 40 hours in a workweek at 1.5 times their rate as of 2026, with no federal cap on total weekly hours. There is no federal requirement for paid sick leave or vacation in restaurant jobs.
