Pipe Welders Needed
Company
Labor One Staffing
Location
Los Angeles, CA
Via
ZipRecruiter
Apply On
Job Description
Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard.
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
Frequently Asked Questions
Quick answers about Restaurant Jobs
What is the federal minimum cash wage for tipped restaurant servers in the United States in 2026?
As per the U.S. Department of Labor, the minimum cash wage for tipped restaurant employees is $2.13 per hour as of January 2026, provided tips bring total earnings to at least $7.25 per hour. Employers must supplement any shortfall to reach the full minimum wage. Overtime at 1.5 times the regular rate applies after 40 hours per week.
What are the minimum age and experience requirements for entry-level restaurant jobs like dishwashers in the United States?
According to the U.S. Department of Labor, workers must be at least 16 years old for most restaurant positions under the Fair Labor Standards Act as of 2026, with 14-15 year olds limited to non-hazardous roles during limited hours. No prior experience or education is required for entry-level roles such as dishwashers or bussers.
Which documents are required when applying for restaurant jobs in the United States?
As per U.S. Citizenship and Immigration Services, applicants must complete Form I-9 with documents proving identity and employment authorization such as a U.S. passport or driver's license plus Social Security card by the first day of work in 2026. Employers verify these within three business days.
How many hours per week can restaurant workers be scheduled and what leave applies in 2026?
The U.S. Department of Labor states that non-exempt restaurant employees receive overtime pay after 40 hours in a workweek at 1.5 times their rate as of 2026, with no federal cap on total weekly hours. There is no federal requirement for paid sick leave or vacation in restaurant jobs.
