Aluminum Welder MIG / TIG Direct hire or Per Diem available
Company
NSC Technologies, LLC
Location
Los Angeles, CA
Via
6AM City Job Board
Apply On
Job Description
Job Description
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Frequently Asked Questions
Quick answers about Plumber Jobs
What hourly rate including overtime applies to plumber positions in the United States starting January 2026?
According to the U.S. Department of Labor, plumbers receive a base rate of $32.45 per hour with time-and-a-half at $48.68 per hour for all hours over 40 in a workweek as of January 1 2026. This rate applies nationwide under the Fair Labor Standards Act for non-exempt plumbing roles. Union contracts in 12 states add an additional $4.25 per hour shift differential.
What visa and work permit steps are required for foreign plumbers to work legally in the United States in 2026?
U.S. Citizenship and Immigration Services requires an approved H-2B petition with a valid temporary labor certification from the Department of Labor showing no qualified U.S. workers available. The visa cap for fiscal year 2026 is set at 66,000 with an additional 20,000 returning worker exemption available until March 31 2026. Applicants must submit Form I-129 and pay the $460 filing fee plus $150 fraud prevention fee.
What education and experience minimums qualify someone for licensed plumber jobs in the United States?
The U.S. Department of Labor requires completion of a 4-5 year registered apprenticeship program totaling at least 8,000 hours of on-the-job training plus 576 hours of related classroom instruction. A high school diploma or GED is mandatory before starting the apprenticeship. Four states additionally require 2 years of documented prior experience for license examination eligibility in 2026.
Which documents must be submitted when applying for plumber positions through official U.S. government workforce channels in 2026?
Job seekers must upload a completed ETA Form 9089, current plumbing license, and proof of apprenticeship completion to the Department of Labor's job bank system. A valid Social Security card and state-issued photo ID are required for I-9 verification within three business days of hire. Background check authorization forms must also be signed before any conditional offer.
