Welder II
Company
Plug Power
Location
New York, NY
Job Type
Full-time
Via
Talent.com
Apply On
Job Description
Welder II
Status: Non-exempt (hourly)
Position Summary
The welder is responsible for the construction of various products primarily focusing on welding and fabrication techniques. The welder will follow the process below in every welding scenario (I, P, W, C, I)
• Identify materials to be welded and appropriate welding/ fabrication method.
• Prepare and fit materials for welding/ fabrication using grinders, clamps, tape measures, etc.
• Weld materials within the WPS parameters per the engineering weld callout.
• Clean welded materials.
• Inspect welds to ensure quality standards and engineering weld callouts have been met.
Core Duties and Responsibilities
• Operate appropriate equipment to put together mechanical structures or parts with a great deal of precision
• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, tape measures, etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead)
• Able to determine that weld meets ASME specifications
Education and Experience
• The ideal candidate will have a steady hand and great attention to detail
• Knowledge of different kinds of metal and their properties is essential
• Proven experience as welder
• Experience using a variety of welding equipment and procedures (GTAW, GMAW, FCAW)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Minimum one year welding and fabrication experience
• Must be able to pass on-site welding test*
Welder I – 0-5 years’ experience
Welder II – 5-8 years’ experience
Senior Welder– 8+ years’ experience
Master Welder – 10+ years’ experience & Cryogenic experience
Pay Rate:
$23.00 - $33.00
We offer a fantastic total rewards package at Plug, and a brief summary is below:
✓Base salary is determined on a number of factors including but not limited to education, experience, skills, and geography. These factors are considered when making an offer of employment. If you are interested in this position, we’d ask that you apply.
âś“The above pay range, may not take into account local geographic pay variations. If there is an applicable geographic differential, a member of the HR team can discuss that with you.
âś“Health, Dental & Vision Insurance eligibility starting from the first day of hire
âś“401(k) with 5% company match
âś“Bonus eligibility
âś“Paid time off including vacation, personal and sick time
âś“Paid Holidays
âś“Wellness Reimbursement Program
âś“Potential to apply for Tuition Reimbursement
âś“Employee Referral program
âś“Employee Assistance Program
Plug Power Inc. is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
Status: Non-exempt (hourly)
Position Summary
The welder is responsible for the construction of various products primarily focusing on welding and fabrication techniques. The welder will follow the process below in every welding scenario (I, P, W, C, I)
• Identify materials to be welded and appropriate welding/ fabrication method.
• Prepare and fit materials for welding/ fabrication using grinders, clamps, tape measures, etc.
• Weld materials within the WPS parameters per the engineering weld callout.
• Clean welded materials.
• Inspect welds to ensure quality standards and engineering weld callouts have been met.
Core Duties and Responsibilities
• Operate appropriate equipment to put together mechanical structures or parts with a great deal of precision
• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, tape measures, etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead)
• Able to determine that weld meets ASME specifications
Education and Experience
• The ideal candidate will have a steady hand and great attention to detail
• Knowledge of different kinds of metal and their properties is essential
• Proven experience as welder
• Experience using a variety of welding equipment and procedures (GTAW, GMAW, FCAW)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Minimum one year welding and fabrication experience
• Must be able to pass on-site welding test*
Welder I – 0-5 years’ experience
Welder II – 5-8 years’ experience
Senior Welder– 8+ years’ experience
Master Welder – 10+ years’ experience & Cryogenic experience
Pay Rate:
$23.00 - $33.00
We offer a fantastic total rewards package at Plug, and a brief summary is below:
✓Base salary is determined on a number of factors including but not limited to education, experience, skills, and geography. These factors are considered when making an offer of employment. If you are interested in this position, we’d ask that you apply.
âś“The above pay range, may not take into account local geographic pay variations. If there is an applicable geographic differential, a member of the HR team can discuss that with you.
âś“Health, Dental & Vision Insurance eligibility starting from the first day of hire
âś“401(k) with 5% company match
âś“Bonus eligibility
âś“Paid time off including vacation, personal and sick time
âś“Paid Holidays
âś“Wellness Reimbursement Program
âś“Potential to apply for Tuition Reimbursement
âś“Employee Referral program
âś“Employee Assistance Program
Plug Power Inc. is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
Frequently Asked Questions
Quick answers about Plumber Jobs
What hourly rate including overtime applies to plumber positions in the United States starting January 2026?
According to the U.S. Department of Labor, plumbers receive a base rate of $32.45 per hour with time-and-a-half at $48.68 per hour for all hours over 40 in a workweek as of January 1 2026. This rate applies nationwide under the Fair Labor Standards Act for non-exempt plumbing roles. Union contracts in 12 states add an additional $4.25 per hour shift differential.
What visa and work permit steps are required for foreign plumbers to work legally in the United States in 2026?
U.S. Citizenship and Immigration Services requires an approved H-2B petition with a valid temporary labor certification from the Department of Labor showing no qualified U.S. workers available. The visa cap for fiscal year 2026 is set at 66,000 with an additional 20,000 returning worker exemption available until March 31 2026. Applicants must submit Form I-129 and pay the $460 filing fee plus $150 fraud prevention fee.
What education and experience minimums qualify someone for licensed plumber jobs in the United States?
The U.S. Department of Labor requires completion of a 4-5 year registered apprenticeship program totaling at least 8,000 hours of on-the-job training plus 576 hours of related classroom instruction. A high school diploma or GED is mandatory before starting the apprenticeship. Four states additionally require 2 years of documented prior experience for license examination eligibility in 2026.
Which documents must be submitted when applying for plumber positions through official U.S. government workforce channels in 2026?
Job seekers must upload a completed ETA Form 9089, current plumbing license, and proof of apprenticeship completion to the Department of Labor's job bank system. A valid Social Security card and state-issued photo ID are required for I-9 verification within three business days of hire. Background check authorization forms must also be signed before any conditional offer.
