IPTW Pipe Welder - Full-time
Company
Matrix Service
Location
Los Angeles, CA
Job Type
Full-time
Salary
38 an hour
Posted
5 days ago
Via
Snagajob
Apply On
Job Description
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Frequently Asked Questions
Quick answers about Plumber Jobs
What hourly rate including overtime applies to plumber positions in the United States starting January 2026?
According to the U.S. Department of Labor, plumbers receive a base rate of $32.45 per hour with time-and-a-half at $48.68 per hour for all hours over 40 in a workweek as of January 1 2026. This rate applies nationwide under the Fair Labor Standards Act for non-exempt plumbing roles. Union contracts in 12 states add an additional $4.25 per hour shift differential.
What visa and work permit steps are required for foreign plumbers to work legally in the United States in 2026?
U.S. Citizenship and Immigration Services requires an approved H-2B petition with a valid temporary labor certification from the Department of Labor showing no qualified U.S. workers available. The visa cap for fiscal year 2026 is set at 66,000 with an additional 20,000 returning worker exemption available until March 31 2026. Applicants must submit Form I-129 and pay the $460 filing fee plus $150 fraud prevention fee.
What education and experience minimums qualify someone for licensed plumber jobs in the United States?
The U.S. Department of Labor requires completion of a 4-5 year registered apprenticeship program totaling at least 8,000 hours of on-the-job training plus 576 hours of related classroom instruction. A high school diploma or GED is mandatory before starting the apprenticeship. Four states additionally require 2 years of documented prior experience for license examination eligibility in 2026.
Which documents must be submitted when applying for plumber positions through official U.S. government workforce channels in 2026?
Job seekers must upload a completed ETA Form 9089, current plumbing license, and proof of apprenticeship completion to the Department of Labor's job bank system. A valid Social Security card and state-issued photo ID are required for I-9 verification within three business days of hire. Background check authorization forms must also be signed before any conditional offer.
