Tank Welder (Req #: 6425)
Company
PALA Interstate, LLC
Location
Houston, TX
Job Type
Full-time
Posted
4 days ago
Via
via Jobs In Welding
Apply On
Job Description
Date Posted: 04/28/2026
Location: Houston, TX
Job Category: Basic Application (PALA)
Salary Interval: Full Time
Pay Range: N/A
The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.
PALA Interstate, LLC
Summary
Lays out, fits and welds together metal components of such products as pipelines, boilers, tanks, structural steel and vehicles.
Reads, studies and interprets job specifications, plans and blue prints. Uses basic math skills including geometry, trigonometry to make calculations for work. Can complete difficult job tasks according to job specifications with minimal or no supervision.
Essential Functions
• Ability to understand and follow all safety rules and to set an example in Safety, Quality, and Production. Measurable criteria will be used in these areas to determine classification.
• Ability to weld to Section 9 of ASME Code in all positions.
• Operations of air arc-gouging and burning torch that requires limited grinding to complete welding process.
• Operation of all air and electric power tools used in a normal tank repair.
• Ability to recognize the proper fit up of weld joints and ability to understand and follow the outlined method of welding.
• Exemplify proper techniques of rigging.
• Understand the proper use of key plates and fit up equipment to control banding and peaking in horizontal and vertical seams.
• Ability to weld approximately 180 linear feet of acceptable seal pass weld using 5P 3/16" electrodes.
• Ability to weld approximately 250 linear feet of acceptable jet weld on 3/16" and 1/4" CS lap weld using 7024-1 electrodes.
• Ability to weld approximately 130 linear feet of completed 3/8" comer weld using 7/32" 7018 electrodes.
• Ability to weld linear feet of vertical and horizontal weld for the following thickness using 7018 electrodes (completed weld):
• Ability to complete items 8 - 10 with no more than 30 minutes of pickup work per day.*Buttering has not been included.
• *Buttering has not been included.
• Ability to complete item 11 with an acceptable RT rate of 95% or higher.
• Ability to work at elevations above ground level using vertical ladders positioned on tank scaffold and ability to work in shell buggies.
• Ability to perform work under breathing air conditions using required respirator.
• Willingness to perform other tank duties on an as needed basis.
• Ability to work in confined space.
• Operation of a Man-Lift.
Required Education and Experience:
• Minimum three years' experience in welding with SMAW, GTAW, and Flux Core process.
• Must pass required welding test as required by the specific job site.
Preferred Education and Experience
• High School or GED preferred but not required.
• Trade School program preferred but not required.
PALA Group, Inc. and its Subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
PI284194095
Location: Houston, TX
Job Category: Basic Application (PALA)
Salary Interval: Full Time
Pay Range: N/A
The data you enter in the online application, including the contents of all attachments, is subject to verification. It is your responsibility to ensure that all the information provided in the application is accurate.
PALA Interstate, LLC
Summary
Lays out, fits and welds together metal components of such products as pipelines, boilers, tanks, structural steel and vehicles.
Reads, studies and interprets job specifications, plans and blue prints. Uses basic math skills including geometry, trigonometry to make calculations for work. Can complete difficult job tasks according to job specifications with minimal or no supervision.
Essential Functions
• Ability to understand and follow all safety rules and to set an example in Safety, Quality, and Production. Measurable criteria will be used in these areas to determine classification.
• Ability to weld to Section 9 of ASME Code in all positions.
• Operations of air arc-gouging and burning torch that requires limited grinding to complete welding process.
• Operation of all air and electric power tools used in a normal tank repair.
• Ability to recognize the proper fit up of weld joints and ability to understand and follow the outlined method of welding.
• Exemplify proper techniques of rigging.
• Understand the proper use of key plates and fit up equipment to control banding and peaking in horizontal and vertical seams.
• Ability to weld approximately 180 linear feet of acceptable seal pass weld using 5P 3/16" electrodes.
• Ability to weld approximately 250 linear feet of acceptable jet weld on 3/16" and 1/4" CS lap weld using 7024-1 electrodes.
• Ability to weld approximately 130 linear feet of completed 3/8" comer weld using 7/32" 7018 electrodes.
• Ability to weld linear feet of vertical and horizontal weld for the following thickness using 7018 electrodes (completed weld):
• Ability to complete items 8 - 10 with no more than 30 minutes of pickup work per day.*Buttering has not been included.
• *Buttering has not been included.
• Ability to complete item 11 with an acceptable RT rate of 95% or higher.
• Ability to work at elevations above ground level using vertical ladders positioned on tank scaffold and ability to work in shell buggies.
• Ability to perform work under breathing air conditions using required respirator.
• Willingness to perform other tank duties on an as needed basis.
• Ability to work in confined space.
• Operation of a Man-Lift.
Required Education and Experience:
• Minimum three years' experience in welding with SMAW, GTAW, and Flux Core process.
• Must pass required welding test as required by the specific job site.
Preferred Education and Experience
• High School or GED preferred but not required.
• Trade School program preferred but not required.
PALA Group, Inc. and its Subsidiaries provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
PI284194095
Frequently Asked Questions
Quick answers about Plumber Jobs
What hourly rate including overtime applies to plumber positions in the United States starting January 2026?
According to the U.S. Department of Labor, plumbers receive a base rate of $32.45 per hour with time-and-a-half at $48.68 per hour for all hours over 40 in a workweek as of January 1 2026. This rate applies nationwide under the Fair Labor Standards Act for non-exempt plumbing roles. Union contracts in 12 states add an additional $4.25 per hour shift differential.
What visa and work permit steps are required for foreign plumbers to work legally in the United States in 2026?
U.S. Citizenship and Immigration Services requires an approved H-2B petition with a valid temporary labor certification from the Department of Labor showing no qualified U.S. workers available. The visa cap for fiscal year 2026 is set at 66,000 with an additional 20,000 returning worker exemption available until March 31 2026. Applicants must submit Form I-129 and pay the $460 filing fee plus $150 fraud prevention fee.
What education and experience minimums qualify someone for licensed plumber jobs in the United States?
The U.S. Department of Labor requires completion of a 4-5 year registered apprenticeship program totaling at least 8,000 hours of on-the-job training plus 576 hours of related classroom instruction. A high school diploma or GED is mandatory before starting the apprenticeship. Four states additionally require 2 years of documented prior experience for license examination eligibility in 2026.
Which documents must be submitted when applying for plumber positions through official U.S. government workforce channels in 2026?
Job seekers must upload a completed ETA Form 9089, current plumbing license, and proof of apprenticeship completion to the Department of Labor's job bank system. A valid Social Security card and state-issued photo ID are required for I-9 verification within three business days of hire. Background check authorization forms must also be signed before any conditional offer.
