Traveling Bridge Fitter/Welder
Company
Tradesmen International, Inc.
Location
Houston, TX
Posted
1 day ago
Via
via Tradesmen International
Apply On
Job Description
Description
Tradesmen International is immediately hiring experienced bridge fabrication Structural Fitters, Bridge Sub Arc Welders, and Bridge Flux Core Welders for projects located in the Olean, NY area . The pay rate is $35/hour for less than 10 years of bridge fabrication experience or $45/hour for 10+ years of bridge fabrication experience plus $125/day per diem for Travelers 60+ miles from the job site. Per diem is paid all 7 days of the week if you work the full schedule. If you want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career!
Job Scope:
• Fitters:
• Fit and assemble structural bridge components in a fabrication shop environment
• Read blueprints and WPS sheets to lay out and fit beams, plate girders, stiffeners, diaphragms, splice plates, and other structural members
• Measure, mark, and align heavy steel to required tolerances prior to welding
• Sub Arc Welders:
• Operate Submerged Arc Welding (SAW) equipment to weld structural bridge components in a fabrication shop
• Weld heavy plate, beams, girders, and bridge assemblies using Sub Arc processes
• Set and monitor wire feed, voltage, travel speed, and flux coverage to maintain proper penetration and bead profile
• Work from blueprints and WPS to complete production welds in accordance with AWS D1.5 Bridge Welding Codes
• Flux Core Welders:
• Perform FCAW welding on structural bridge components in a fabrication shop environment
• Weld heavy structural steel including plate, beams, stiffeners, diaphragms, and structural assemblies used in bridge construction
• Follow WPS procedures to maintain proper voltage, travel speed, and penetration. Perform multi-pass welds on thick structural material while maintaining required bead profile and fusion
• Ensure welds meet AWS D1.5 Bridge Welding Code standards and pass required inspections
Requirements
• Must have welding experience in a bridge fabrication shop
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
• Ability to consistently maintain weld quality that meets visual and NYS DOT requirements
• Pass on-site 3G FCAW weld test subject to bend and X-ray inspection to meet NYS DOT requirements
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
Company Details
Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.
Our comprehensive benefits include:
• Tradesmen+ Rewards Program – earn points for hours worked
• Vacation Pay
• Health insurance
• 401(k) retirement savings plan
Tradesmen International is an EO employer - M/F/Veteran/Disability
“ Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, pleasecall or visit your closest Tradesmen office (https://www.tradesmeninternational.com/directory/) to verify the request.
Click here to visit Tradesmen’s full website. (http://www.tradesmeninternational.com)
Location
US-TX-HOUSTON
Posted Date 1 hour ago (5/20/2026 3:31 PM)
Req ID 2026-366555
Category Welder - Welder
Travel Yes
Job Board SPS Team
Location US-TX-HOUSTON
Tradesmen International is immediately hiring experienced bridge fabrication Structural Fitters, Bridge Sub Arc Welders, and Bridge Flux Core Welders for projects located in the Olean, NY area . The pay rate is $35/hour for less than 10 years of bridge fabrication experience or $45/hour for 10+ years of bridge fabrication experience plus $125/day per diem for Travelers 60+ miles from the job site. Per diem is paid all 7 days of the week if you work the full schedule. If you want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career!
Job Scope:
• Fitters:
• Fit and assemble structural bridge components in a fabrication shop environment
• Read blueprints and WPS sheets to lay out and fit beams, plate girders, stiffeners, diaphragms, splice plates, and other structural members
• Measure, mark, and align heavy steel to required tolerances prior to welding
• Sub Arc Welders:
• Operate Submerged Arc Welding (SAW) equipment to weld structural bridge components in a fabrication shop
• Weld heavy plate, beams, girders, and bridge assemblies using Sub Arc processes
• Set and monitor wire feed, voltage, travel speed, and flux coverage to maintain proper penetration and bead profile
• Work from blueprints and WPS to complete production welds in accordance with AWS D1.5 Bridge Welding Codes
• Flux Core Welders:
• Perform FCAW welding on structural bridge components in a fabrication shop environment
• Weld heavy structural steel including plate, beams, stiffeners, diaphragms, and structural assemblies used in bridge construction
• Follow WPS procedures to maintain proper voltage, travel speed, and penetration. Perform multi-pass welds on thick structural material while maintaining required bead profile and fusion
• Ensure welds meet AWS D1.5 Bridge Welding Code standards and pass required inspections
Requirements
• Must have welding experience in a bridge fabrication shop
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
• Ability to consistently maintain weld quality that meets visual and NYS DOT requirements
• Pass on-site 3G FCAW weld test subject to bend and X-ray inspection to meet NYS DOT requirements
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
Company Details
Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.
Our comprehensive benefits include:
• Tradesmen+ Rewards Program – earn points for hours worked
• Vacation Pay
• Health insurance
• 401(k) retirement savings plan
Tradesmen International is an EO employer - M/F/Veteran/Disability
“ Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, pleasecall or visit your closest Tradesmen office (https://www.tradesmeninternational.com/directory/) to verify the request.
Click here to visit Tradesmen’s full website. (http://www.tradesmeninternational.com)
Location
US-TX-HOUSTON
Posted Date 1 hour ago (5/20/2026 3:31 PM)
Req ID 2026-366555
Category Welder - Welder
Travel Yes
Job Board SPS Team
Location US-TX-HOUSTON
Frequently Asked Questions
Quick answers about Packing Jobs
What is the minimum wage for packing jobs in the United States in 2026?
As per the United States Department of Labor, the federal minimum wage for packing jobs is $7.25 per hour as of 2026, with overtime required at 1.5 times the regular rate after 40 hours in a workweek. Many warehouse packing positions in states like California pay at least $16.50 per hour under state laws effective January 1, 2026.
Which visa do international applicants need for packing jobs in the United States?
As per the United States Citizenship and Immigration Services, temporary non-agricultural packing jobs require an H-2B visa with employer-filed petitions due by the 2026 cap deadlines of January 1 and July 1. Applicants must also hold valid work authorization and pass background checks before starting employment.
What education or prior experience is required for entry-level packing jobs?
As per the United States Department of Labor, packing jobs have no formal education requirement beyond a high school diploma or GED equivalent and provide on-the-job training with zero prior experience needed for most warehouse roles in 2026.
What documents must be submitted when applying for packing jobs?
As per the United States Department of Labor, applicants need a valid photo ID, Social Security card or ITIN, and Form I-9 employment eligibility documents submitted directly to the employer by the 2026 start date. Background checks and drug screenings are completed before the first shift.
