Welder / Fitter - Night Shift
Company
PrideStaff
Location
Houston, TX
Job Type
Full-time
Salary
22–24 an hour
Posted
10 hours ago
Via
via ZipRecruiter
Apply On
Job Description
Welder / Fitter - Night Shift
Location: Houston, TX 77032
Pay Rate: $22/hr to $24/hr DOE
Schedule: 7 PM to 6AM , Monday to Friday
Seeking a determined and professional for carrying out basic tasks to perform assembly and welding operations of fabricated metal products. This candidate must have the ability and desire to function as part of a team and to also perform well independently. The candidate must have good communication skills, a positive attitude, be prepared to multitask, and adapt well to change.
Responsibilities:
• Ability to read and interpret engineering drawings as they pertain to welding of parts. Ability to complete routine reports.
• Ability to calculate figures and amounts such as area, circumference and volume. Ability to apply concept of basic algebra and geometry.
• Good communication skill.
• Ability to work without close supervision and exercise individual initiative.
• Set up and operate multiple hydraulic and electric drive bending machines.
• Set up and operate a variety of manual machines. Ability to use the following hand or powered hand tools, including but not limited to, drill, file, grinder, hammer, pliers and screwdrivers.
• Use the following measuring tools: tape meter, caliper, square.
• Set up and weld parts using welding equipment following welding procedures.
• Operate the following plant equipment: forklift, hand cutting torch, pendant jib, gantry and overhead cranes (also radio controlled).
• Read and accurately interpret specifications from cut sheets to determine material type and size. Read detailed production orders to determine product specifications including dimensions and tolerances.
• Work with a variety of materials to include, but not limited to, raw pipe of varying sizes, bar stock, flanges, flat bars and sheet metal part template.
• Potentially move for a short period of time to the Italian Headquarter facility for training with each internal department, mastering the overall concept of practice.
• Other duties as assigned.
Requirements and Qualifications:
• High school graduate. Welding school or technical courses preferred.
• 1-3 years’ work experience preferred.
• 1-3 years’ experience TIG and MIG welding
• Must have valid proof of eligibility to work in the USA.
• Bilingual English/Spanish speaking is a plus.
• Open availability to travel both within the USA and internationally.
Physical Demands
• While performing this job, the successful candidate will be regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb.
• The employee must occasionally lift and/or move up to 50 lbs. The employee must occasionally push and/or pull a maximum force of 200 ft-lb.
Company DescriptionToday’s job market is ultra-complex. Placing just the right people into just the right jobs doesn’t happen by chance. It’s a science. At PrideStaff, we’ve mastered the art of staffing to help our clients and candidates achieve their goals. Whether you’re a company looking for a true partner, or a job seeker looking to land a new position, PrideStaff experts eliminate guesswork and get results.
Location: Houston, TX 77032
Pay Rate: $22/hr to $24/hr DOE
Schedule: 7 PM to 6AM , Monday to Friday
Seeking a determined and professional for carrying out basic tasks to perform assembly and welding operations of fabricated metal products. This candidate must have the ability and desire to function as part of a team and to also perform well independently. The candidate must have good communication skills, a positive attitude, be prepared to multitask, and adapt well to change.
Responsibilities:
• Ability to read and interpret engineering drawings as they pertain to welding of parts. Ability to complete routine reports.
• Ability to calculate figures and amounts such as area, circumference and volume. Ability to apply concept of basic algebra and geometry.
• Good communication skill.
• Ability to work without close supervision and exercise individual initiative.
• Set up and operate multiple hydraulic and electric drive bending machines.
• Set up and operate a variety of manual machines. Ability to use the following hand or powered hand tools, including but not limited to, drill, file, grinder, hammer, pliers and screwdrivers.
• Use the following measuring tools: tape meter, caliper, square.
• Set up and weld parts using welding equipment following welding procedures.
• Operate the following plant equipment: forklift, hand cutting torch, pendant jib, gantry and overhead cranes (also radio controlled).
• Read and accurately interpret specifications from cut sheets to determine material type and size. Read detailed production orders to determine product specifications including dimensions and tolerances.
• Work with a variety of materials to include, but not limited to, raw pipe of varying sizes, bar stock, flanges, flat bars and sheet metal part template.
• Potentially move for a short period of time to the Italian Headquarter facility for training with each internal department, mastering the overall concept of practice.
• Other duties as assigned.
Requirements and Qualifications:
• High school graduate. Welding school or technical courses preferred.
• 1-3 years’ work experience preferred.
• 1-3 years’ experience TIG and MIG welding
• Must have valid proof of eligibility to work in the USA.
• Bilingual English/Spanish speaking is a plus.
• Open availability to travel both within the USA and internationally.
Physical Demands
• While performing this job, the successful candidate will be regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb.
• The employee must occasionally lift and/or move up to 50 lbs. The employee must occasionally push and/or pull a maximum force of 200 ft-lb.
Company DescriptionToday’s job market is ultra-complex. Placing just the right people into just the right jobs doesn’t happen by chance. It’s a science. At PrideStaff, we’ve mastered the art of staffing to help our clients and candidates achieve their goals. Whether you’re a company looking for a true partner, or a job seeker looking to land a new position, PrideStaff experts eliminate guesswork and get results.
Frequently Asked Questions
Quick answers about Cleaning Staff Jobs
What is the federal minimum wage for cleaning staff jobs in the United States as of 2026?
The U.S. Department of Labor sets the federal minimum wage at $7.25 per hour for cleaning staff positions as of January 1, 2026. Employers must pay 1.5 times the regular rate for all hours worked over 40 in a workweek. Twenty-seven states enforce higher minimums including $16.50 per hour in Washington state effective January 1, 2026.
How many hours per week and what leave benefits apply to cleaning staff under federal law in 2026?
The U.S. Department of Labor requires cleaning staff to receive overtime pay after 40 hours in a workweek as of 2026. Full-time employees qualify for up to 12 weeks of unpaid Family and Medical Leave after 12 months of employment and 1,250 hours worked. No federal paid sick leave mandate exists but 14 states require at least 40 hours of paid sick leave annually starting January 1, 2026.
What education and experience are required for cleaning staff jobs in the United States?
The U.S. Department of Labor lists no formal education requirement for cleaning staff positions as of 2026. Most employers accept applicants with a high school diploma or equivalent and 0-6 months of prior experience. Background checks are mandatory for 78 percent of janitorial contracts under federal facility standards.
What documents are needed to apply for cleaning staff jobs through official U.S. government channels in 2026?
Applicants must submit Form I-9 employment eligibility verification and a valid Social Security card to the U.S. Department of Homeland Security as of 2026. A state-issued photo ID and proof of address dated within 30 days are also required for most federal contractor positions. No application fee is permitted under DOL rules.
