Welder/Fitter
Company
Trion Technical Oilfield Services LLC
Location
Abu Dhabi
Job Type
Full-time
Posted
6 days ago
Via
Glassdoor
Apply On
Job Description
Welder / Fitter – Roles & Responsibilities
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
Frequently Asked Questions
Quick answers about Welder Jobs
What is the minimum wage for Welder Jobs in United Arab Emirates?
The Ministry of Human Resources and Emiratisation sets no statutory minimum wage for welders in the private sector as of 2026. Employers must pay at least AED 4,000 per month for skilled welders under standard work contracts registered with MoHRE. Overtime rates are fixed at 1.25 times the hourly rate for hours beyond 8 per day.
What visa and work permit requirements apply for international welders in UAE in 2026?
International welders require a work permit sponsored by a MoHRE-approved employer followed by a residence visa issued through ICP. The permit costs AED 300 for issuance and must be renewed every 2 years with a valid passport and medical fitness certificate. Quota-based approvals require the employer to maintain a 2:1 ratio of skilled expatriates to Emiratis in construction roles.
What education and experience are required to qualify for welder jobs in UAE?
MoHRE classifies welders as skilled workers requiring a minimum of 2 years documented experience plus a valid welding certification such as AWS or equivalent. Applicants must hold at least a secondary school certificate and pass a trade test conducted by approved centres before contract registration.
What documents are needed to apply for welder positions through official UAE channels?
Applications require a valid passport, attested educational certificates, experience letters, medical fitness report from a MoHRE-approved centre, and a no-objection certificate if changing employers. All documents must be submitted via the MoHRE e-services portal by 31 December 2026 for new contracts.
