Welder/Fabricator/Fitter
Company
Trion Technical Oilfield Services LLC
Location
Abu Dhabi
Job Type
Full-time
Posted
6 days ago
Via
Glassdoor
Apply On
Job Description
Fabricator – Roles & Responsibilities
1. Reading & Understanding Drawings
• Interpret technical drawings, blueprints, and specifications
• Understand dimensions, tolerances, and material requirements
2. Material Preparation
• Select correct materials (MS, GI, SS, plates, pipes, etc.)
• Marking, measuring, and cutting materials as per drawings
3. Fabrication Work
• Perform cutting, grinding, drilling, bending, and fitting
• Assemble components as per design
• Ensure proper alignment and dimensional accuracy
4. Welding & Joining
• Carry out welding (ARC, MIG, TIG as required)
• Ensure strong, clean, and defect-free joints
• Follow WPS (Welding Procedure Specification) if applicable
5. Use of Tools & Equipment
• Operate fabrication machines (cutting machine, drilling machine, rolling, etc.)
• Use hand tools and measuring instruments safely and accurately
6. Quality Control
• Check finished work against drawings and specifications
• Ensure proper finishing, dimensions, and fit-up
• Rectify defects if any
7. Installation Support (if required)
• Assist in site installation and erection work
• Ensure proper fixing and alignment on site
8. Safety Compliance
• Follow safety procedures and PPE requirements
• Maintain clean and safe working environment
9. Maintenance of Tools
• Maintain tools and equipment in good condition
• Report any faults or damages
10. Coordination
• Work with supervisors, engineers, and other team members
• Report progress and any issues during fabrication
Job Type: Full-time
Pay: From AED2,000.00 per month
Work Location: In person
1. Reading & Understanding Drawings
• Interpret technical drawings, blueprints, and specifications
• Understand dimensions, tolerances, and material requirements
2. Material Preparation
• Select correct materials (MS, GI, SS, plates, pipes, etc.)
• Marking, measuring, and cutting materials as per drawings
3. Fabrication Work
• Perform cutting, grinding, drilling, bending, and fitting
• Assemble components as per design
• Ensure proper alignment and dimensional accuracy
4. Welding & Joining
• Carry out welding (ARC, MIG, TIG as required)
• Ensure strong, clean, and defect-free joints
• Follow WPS (Welding Procedure Specification) if applicable
5. Use of Tools & Equipment
• Operate fabrication machines (cutting machine, drilling machine, rolling, etc.)
• Use hand tools and measuring instruments safely and accurately
6. Quality Control
• Check finished work against drawings and specifications
• Ensure proper finishing, dimensions, and fit-up
• Rectify defects if any
7. Installation Support (if required)
• Assist in site installation and erection work
• Ensure proper fixing and alignment on site
8. Safety Compliance
• Follow safety procedures and PPE requirements
• Maintain clean and safe working environment
9. Maintenance of Tools
• Maintain tools and equipment in good condition
• Report any faults or damages
10. Coordination
• Work with supervisors, engineers, and other team members
• Report progress and any issues during fabrication
Job Type: Full-time
Pay: From AED2,000.00 per month
Work Location: In person
Frequently Asked Questions
Quick answers about Welder Jobs
What is the minimum wage for Welder Jobs in United Arab Emirates?
The Ministry of Human Resources and Emiratisation sets no statutory minimum wage for welders in the private sector as of 2026. Employers must pay at least AED 4,000 per month for skilled welders under standard work contracts registered with MoHRE. Overtime rates are fixed at 1.25 times the hourly rate for hours beyond 8 per day.
What visa and work permit requirements apply for international welders in UAE in 2026?
International welders require a work permit sponsored by a MoHRE-approved employer followed by a residence visa issued through ICP. The permit costs AED 300 for issuance and must be renewed every 2 years with a valid passport and medical fitness certificate. Quota-based approvals require the employer to maintain a 2:1 ratio of skilled expatriates to Emiratis in construction roles.
What education and experience are required to qualify for welder jobs in UAE?
MoHRE classifies welders as skilled workers requiring a minimum of 2 years documented experience plus a valid welding certification such as AWS or equivalent. Applicants must hold at least a secondary school certificate and pass a trade test conducted by approved centres before contract registration.
What documents are needed to apply for welder positions through official UAE channels?
Applications require a valid passport, attested educational certificates, experience letters, medical fitness report from a MoHRE-approved centre, and a no-objection certificate if changing employers. All documents must be submitted via the MoHRE e-services portal by 31 December 2026 for new contracts.
