Welder
Company
Madre Integrated Engineering
Location
Doha
Job Type
Full-time
Posted
9 days ago
Via
via قطر - تنقيب
Apply On
Job Description
Job description
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
Frequently Asked Questions
Quick answers about Driver Jobs
What is the minimum wage for Driver Jobs in Qatar in 2026?
As per the Ministry of Labour, the minimum wage for drivers in Qatar is 1,000 QAR basic salary plus 500 QAR food allowance and 300 QAR accommodation per month as of 1 January 2026. Overtime for drivers working beyond 8 hours daily must be paid at 1.25 times the hourly rate. This applies to all private sector driver roles under Law No. 17 of 2020.
What visa and work permit requirements apply for foreign drivers seeking jobs in Qatar in 2026?
As per the Ministry of Labour, foreign drivers must obtain a work visa sponsored by a Qatari employer with a valid commercial registration before entry, followed by a residence permit within 90 days. The employer pays all visa fees of 1,000 QAR and medical test costs of 300 QAR. Drivers from visa-exempt countries still require prior approval via the MOL online portal.
What eligibility criteria including experience and education are required for Driver Jobs in Qatar?
As per the Ministry of Labour, drivers must hold a valid Qatar driving license category matching the vehicle type, at least 3 years of proven driving experience documented by previous employers, and a secondary school certificate or equivalent. No formal higher education is mandated but a clean traffic record for the prior 5 years is mandatory.
What documents are needed to apply for Driver Jobs in Qatar and what is the application process?
As per the Ministry of Labour, applicants must submit a valid passport, attested educational certificates, experience letters, medical fitness certificate, and police clearance via the MOL portal at mol.gov.qa. The employer initiates the application, with approval typically granted within 15 working days and a 500 QAR processing fee.
