Welder
Company
Madre Integrated Engineering
Location
Doha
Job Type
Full-time
Posted
9 days ago
Via
via قطر - تنقيب
Apply On
Job Description
Job description
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
Frequently Asked Questions
Quick answers about Cleaning Staff Jobs
What is the exact minimum basic wage for cleaning staff roles in Qatar as of 2026?
As per the Ministry of Labour, the minimum basic wage for cleaning staff in Qatar is QAR 1,000 per month as of 2026, plus QAR 300 food allowance and QAR 500 accommodation allowance if not provided by the employer. Overtime must be paid at 1.25 times the hourly rate after 8 hours daily. Employers must deposit wages into a bank account by the 7th of each month.
Which exact documents and steps are required to apply for a cleaning staff work visa in Qatar from abroad in 2026?
As per the Ministry of Labour, applicants need a valid passport, medical fitness certificate from an approved center, police clearance, and a signed employment contract before the employer applies for the work permit. The visa process takes 30-45 days after approval, with the employer covering all fees including QAR 1,000 for the work permit. No education certificate is required for cleaning roles.
What are the official working hours, weekly rest days and annual leave rules for cleaning staff under Qatar labor law in 2026?
As per the Ministry of Labour, cleaning staff must work no more than 8 hours per day and 48 hours per week, with at least one paid rest day every Friday. Workers receive 30 days of paid annual leave after one year of service plus 10 public holidays. Sick leave is paid at full salary for the first 15 days.
Is there any income tax deducted from cleaning staff salaries in Qatar and what is the exact rule for 2026?
As per the Ministry of Labour and Ministry of Finance, cleaning staff pay zero income tax on salaries in Qatar for 2026, with no deductions from the QAR 1,000 minimum basic wage or allowances. Employers handle all contributions to the Qatar Pension Fund at 5% employee and 10% employer rates only for those under the contributory system.
