Welder - (Outsourced Contractor)
Company
Emirates Global Aluminium
Location
Dubai
Job Type
Contractor
Posted
4 days ago
Via
Emirates Global Aluminium - EGA
Apply On
Job Description
Please note that this role will be under a third-party contractor and is not a direct hire with EGA.
JOB PURPOSE:
• To perform welding operations on various weld joints in all required positions, ensuring high-quality, defect-free welds that meet project specifications and standards.
• To work with Pot Lining Technicians / Operators during cell lining department routine activities particularly pot shell structural repair & superstructure overhauling, live bus bar welding in pot lines and replacement of eroded / damaged cathode flexible during pot turnaround activities under close supervision.
KEY ACCOUNTABILITIES:
• Perform welding tasks using ARC & MIG welding processes (SMAW, FCAW & GMAW) in all positions (flat, horizontal, vertical, overhead).
• Capable to perform welding in high temperature areas and in strong magnetic field of pot lines.
• Ensure welds meet quality standards and are free from defects such as cracks, porosity, and incomplete fusion.
• Perform Gas cutting task, carbon arc gauging and thermal lancing activities.
• Ability to identify industrial tools, welding equipment and carry out pre-operational check prior to use.
• Strictly adhere to EHS safety protocols, company policies and wear required PPEs.
• Maintain all the required equipment, welding machine and tools in good working condition and ensure readily available at work location.
• Must be aware of basic 5S concept and able to identify and correct hazards to provide safe workplace.
• Ensure good housekeeping is maintained at work place all the time and debris are disposed properly in designated skips.
• Seek advice from shift in charge / supervisor about job safety and participate in daily toolbox talk.
• Report any unsafe conditions, incidents, or near misses to the supervisor immediately.
QUALIFICATIONS & SKILLS:
Minimum Qualifications:
• Mandatory qualification and hands-on experience in both ARC & MIG welding processes:
• FCAW (Flux-Cored Arc Welding)
• GMAW (Gas Metal Arc Welding)
• SMAW (Shielded Metal Arc welding)
Skills:
• Proven experience in industrial or construction welding projects.
• Ability to read and interpret Welding Procedure Specification, welding symbols and basic technical drawings.
• Welders Performance Qualification Certificates will be considered an added advantage.
• Must be able to read, write, speak and understand basic English.
• Able to identify industrial tools and equipment by names and their safe usage.
Minimum Experience: Minimum 2 years’ experience as a welder in industry.
JOB PURPOSE:
• To perform welding operations on various weld joints in all required positions, ensuring high-quality, defect-free welds that meet project specifications and standards.
• To work with Pot Lining Technicians / Operators during cell lining department routine activities particularly pot shell structural repair & superstructure overhauling, live bus bar welding in pot lines and replacement of eroded / damaged cathode flexible during pot turnaround activities under close supervision.
KEY ACCOUNTABILITIES:
• Perform welding tasks using ARC & MIG welding processes (SMAW, FCAW & GMAW) in all positions (flat, horizontal, vertical, overhead).
• Capable to perform welding in high temperature areas and in strong magnetic field of pot lines.
• Ensure welds meet quality standards and are free from defects such as cracks, porosity, and incomplete fusion.
• Perform Gas cutting task, carbon arc gauging and thermal lancing activities.
• Ability to identify industrial tools, welding equipment and carry out pre-operational check prior to use.
• Strictly adhere to EHS safety protocols, company policies and wear required PPEs.
• Maintain all the required equipment, welding machine and tools in good working condition and ensure readily available at work location.
• Must be aware of basic 5S concept and able to identify and correct hazards to provide safe workplace.
• Ensure good housekeeping is maintained at work place all the time and debris are disposed properly in designated skips.
• Seek advice from shift in charge / supervisor about job safety and participate in daily toolbox talk.
• Report any unsafe conditions, incidents, or near misses to the supervisor immediately.
QUALIFICATIONS & SKILLS:
Minimum Qualifications:
• Mandatory qualification and hands-on experience in both ARC & MIG welding processes:
• FCAW (Flux-Cored Arc Welding)
• GMAW (Gas Metal Arc Welding)
• SMAW (Shielded Metal Arc welding)
Skills:
• Proven experience in industrial or construction welding projects.
• Ability to read and interpret Welding Procedure Specification, welding symbols and basic technical drawings.
• Welders Performance Qualification Certificates will be considered an added advantage.
• Must be able to read, write, speak and understand basic English.
• Able to identify industrial tools and equipment by names and their safe usage.
Minimum Experience: Minimum 2 years’ experience as a welder in industry.
Frequently Asked Questions
Quick answers about Driver Jobs
What minimum monthly salary must a driver earn to qualify for a UAE work visa in 2026?
As per the Ministry of Human Resources and Emiratisation, drivers must receive a minimum salary of AED 4,000 per month as of January 2026 to meet work visa issuance criteria. Overtime pay is calculated at 1.25 times the hourly rate after 8 hours daily. This threshold applies to both light and heavy vehicle driver categories under Federal Decree-Law No. 33 of 2021.
Which specific driving licence and experience documents are required for a heavy vehicle driver job in the UAE?
As per the Ministry of Human Resources and Emiratisation, applicants need a valid UAE heavy vehicle licence or equivalent GCC licence plus at least two years of documented experience in the past five years. A valid medical fitness certificate issued within the last six months is mandatory. Educational qualification must be at minimum secondary school certificate.
What are the exact working hours and annual leave entitlements for drivers employed in the UAE private sector in 2026?
As per the Ministry of Human Resources and Emiratisation, drivers are limited to eight hours per day and 48 hours per week with Friday as the mandatory weekly rest day. Annual leave entitlement is 30 calendar days after completing one year of service. Employers must provide paid sick leave of 90 days per year at full or half pay depending on service length.
Which documents must be submitted for a driver work permit application through the UAE Ministry portal?
As per the Ministry of Human Resources and Emiratisation, the required documents include a valid passport, attested educational certificates, driving licence, medical fitness report, and employer offer letter stamped by MOHRE. All documents must be uploaded via the MOHRE e-services portal before 31 December 2026. No application fee applies for the initial permit if salary meets the AED 4,000 threshold.
